Weak Ligand‐Field Effect from Ancillary Ligands on Enhancing Single‐Ion Magnet Performance

A series of bis‐pentamethylcyclopentadienyl‐supported Dy complexes containing different ancillary ligands were synthesized and characterized. Magnetic studies showed that 1 Dy [Cp*₂DyCl(THF)], 1 Dy’ [Cp*₂DyCl₂K(THF)]_n, 2 Dy [Cp*₂DyBr(THF)], 3 Dy [Cp*₂DyI(THF)] and 4 Dy [Cp*₂DyTp] (Tp=hydrotris(1‐pyrazolyl)borate) were single‐ion magnets (SIMs). The 1D dysprosium chain 1 Dy’ exhibited a hysteresis at up to 5 K. Furthermore, 3 Dy featured the highest energy barrier (419 cm^?1) among the complexes. The effects of ancillary ligands on single‐ion magnetic properties were studied by experimental, ab initio calculations and electrostatic analysis methods in detail. These results demonstrated that the QTM rate was strongly dependent on the ancillary ligands and that a weak equatorial ligand field could be beneficial for constructing Dy‐SIMs.     

Synthesis and characterization of CaTiO3-(Sm,Nd)AlO3 microwave ceramics via sol–gel method

0.65CaTiO₃–0.35Sm_0.9Nd_0.1AlO₃ (CTSA) ceramic nanopowders were synthesized via sol–gel method using the ethylene diamine tetraacetic acid as a chelating agent. Thermal analysis, Fourier transform infrared spectroscopy and X-ray diffraction were used to character the decomposition of precursor and phase transformation process of derived oxide powders. Single phase and well-crystallized 0.65CaTiO₃–0.35Sm_0.9Nd_0.1AlO₃ powders with particle size of 30–40 nm were obtained by calcination at 800 °C. Dense ceramic was successfully obtained from the ultrafine powders sintered at 1,325 °C, almost 100 °C lower than 1,415 °C required for conventional powders. Compared with those prepared by conventional solid-state method, the CTSA ceramics derived from sol to gel process sintered at a lower temperature showed better microwave dielectric properties of ε_r ~ 39, Q × f over 50,000 GHz and small τ_f ~ ?7.1 ppm/K.     

Modification of hydrophilic channels in Nafion membranes by DMBA: Mechanism and effects on proton conductivity

Modification of proton conductive channels (PCCs) in Nafion has been achieved with the assistance of 3, 4‐dimethylbenzaldehyde (DMBA). During annealing, ionic clusters develop from small isolated spheres (1.72 nm) to wide continuous channels (5.15 nm), and the crystallinity of Nafion/DMBA membranes is also improved from 17% to 32% as shown by X‐ray diffraction. Molecular dynamic simulation reveals that hydrogen bonding and hydrophobic interaction between DMBA and Nafion work synergistically to achieve better phase separation. The morphology–property relationship shows that, versus various PCCs width, the corresponding proton conductivities vary greatly from 0.079 to 0.139 S/cm at 80 °C. By carefully tuning the width of PCCs, the proton conductivity shows an improvement of 22–34% as compared with pristine Nafion. A significant enhancement on the maximum power density is achieved for the membrane electrode assembly on Nafion/DMBA‐8h (as high as 1018 mW/cm^?2), yielding an enhancement of 39% on pristine Nafion‐8h (730 mW/cm^?2). © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 52, 1107–1117     

Determination of selected polychlorinated biphenyls in soil and earthworm (Eisenia fetida) using a QuEChERS‐based method and gas chromatography with tandem MS

Soil and earthworms are important objects in soil pollution assessment and environmental behavior and toxicity study for polychlorinated biphenyls. Accelerated solvent extraction and solid‐phase extraction are generally required for the extraction and clean‐up of polychlorinated biphenyls in soil and earthworm, which are tedious and time‐consuming. In this work, a modified QuEChERS (quick, easy, cheap, effective, rugged, and safe) procedure combined with gas chromatography and triple quadrupole mass spectrometry was developed for the determination of 20 selected polychlorinated biphenyl congeners in soil and earthworm. Different extraction times, solvents, and clean‐up adsorbents were compared and optimized. The average recoveries from spiked soils ranged between 70 and 120% with satisfactory relative standard deviations for all the polychlorinated biphenyls. In earthworm, the recoveries of polychlorinated biphenyls 180, 183, and 189 were relatively low (< 70% in some spiking levels) compared to that of the other polychlorinated biphenyls. The limits of quantification were in the range of 0.01–0.05 ng/g. The method was successfully applied to the analysis of 66 agricultural soils. To our knowledge, a combined method based on QuEChERS for the determination of polychlorinated biphenyls in soil and earthworms has not been published before. The procedure proved to be simple, sensitive, efficient, and environmentally friendly.     

Synthesis of Nanoporous Ni‐Co Mixed Oxides by Thermal Decomposition of Metal‐Cyanide Coordination Polymers

A straightforward strategy to prepare nanoporous metal oxides with well‐defined shapes is highly desirable. Through thermal treatment and a proper selection of metal‐cyanide coordination polymers, nanoporous nickel‐cobalt mixed oxides with different shapes (i.e., flakes and cubes) can be easily prepared. Our nanoporous materials demonstrate high electrocatalytic activity for oxygen evolution reaction.     

A Nanoscale Multiresponsive Luminescent Sensor Based on a Terbium(III) Metal–Organic Framework

A nanoscale terbium‐containing metal–organic framework ( nTbL ), with a layer‐like structure and [H₂NMe₂]⁺ cations located in the framework channels, was synthesized under hydrothermal conditions. The structure of the as‐prepared sample was systematically confirmed by powder XRD and elemental analysis; the morphology was characterized by field‐emission SEM and TEM. The photoluminescence studies revealed that rod‐like nTbL exhibited bright‐green emission, corresponding to ⁵D₄→⁷F_J (J=6–3) transitions of the Tb³⁺ ion under excitation. Further sensing measurements revealed that as‐prepared nTbL could be utilized as a multiresponsive luminescent sensor, which showed significant and exclusive detection ability for Fe³⁺ ions and phenylmethanol. These results highlight the practical applications of lanthanide‐containing metal–organic frameworks as fluorescent probes.     

Tetraphenylpyrazine-based AIEgens: facile preparation and tunable light emission

Research on aggregation-induced emission (AIE) has been a hot topic. Due to enthusiastic efforts by many researchers, hundreds of AIE luminogens (AIEgens) have been generated which were mainly based on archetypal silole, tetraphenylethene, distyrylanthracene, triphenylethene, and tetraphenyl-1,4-butadiene, etc. To enlarge the family of AIEgens and to enrich their functions, new AIEgens are in high demand. In this work, we report a new kind of AIEgen based on tetraphenylpyrazine (TPP), which could be readily prepared under mild reaction conditions. Furthermore, we show that the TPP derivatives possess a good thermal stability and their emission could be fine-tuned by varying the substituents on their phenyl rings. It is anticipated that TPP derivatives could serve as a new type of widely utilized AIEgen, based on their facile preparation, good thermo-, photo- and chemostabilities, and efficient emission.